Solana Leg Press Option Assembly Instructions
page 11
1
2
3
4
5
6
Step 5. Route the Cable
5. Route the Cable
A. Ask your assistant to continue to hold the Support
Arm in a vertical position next to the Pulley Plate
while you route the Cable.
B. Route the cable through the pulleys on the Pulley
Plate. To release tension on the Cable while you pull
the cable around the Support Arm pulley, have your
assistant lift the Top Cap Weight (see the illustration
on page 10). Adjust the cable retainers and make
sure that the Cable moves freely before you tighten
any bolts.
Note:
The pulleys should be positioned with the
edges in-line so that the cable moves freely. If a
pulley is not aligned properly, you can adjust its
position by using washers as spacers. Be sure that
you always maintain a minimum 1/8-inch clearance
between the bolt head and nearby structures.
C. Relocate the lower 3½" pulley on the Floating Pulley
Plate. Loosen and remove the bolt and fasteners
that secure the lower 3½" pulley to the Floating
Pulley Plate. Reattach the pulley and fasteners
onto the lowest hole on the Pulley Plate. Make sure
that the Cable moves freely and then tighten the
bolt securely.
D. Route the Cable. Properly adjust any cable
retainers. Make sure that the cable moves freely
before you tighten any bolts. Your assistant can
let go of the Support Arm after the Cable is routed
and secured.
E. Wrench tighten all pulley fasteners.
Floating
Pulley Plate
Relocate the
3½" pulley to
the lower hole
C
Make sure that the cable moves
freely and then tighten the bolt
securely
D
Overview of
the cable route
B
Route the cable around the
pulleys and inside the cable
retainers before tightening
the fasteners
4½" pulley
Support Arm
Pulley Plate
E
Tighten the fasteners on all
three pulleys
Support
Arm
Socket wrench
Box-end
wrench
