Solana Leg Press Option Assembly Instructions
page 12
1
2
3
4
5
6
4
Cable Adjustments
Cable Adjustments
After the Leg Press Option is fully assembled, you must
check the cables for proper tension. Obvious signs that
cable problems exist include:
✔
Excess slack exists in the Cable.
✔
The Top Cap Weight does not rest squarely on the
Weight Stack.
✔
The Cable rubs the inside edges of the pulleys.
CAUTION: Take the time to perform the following
steps. If the cables do not have the proper tension,
you could damage the machine and void the Precor
limited warranty.
Adjustments to the cable can be made in two places:
❑
the Press Arm Bumper Pad.
❑
the Rubber Bumper on the Support Arm.
Note
: For adjustments to the Selector Stem, refer to
your
Solana Assembly Instructions and Maintenance
Guide.
Areas of cable adjustments are shown with arrows
Press Arm
Adjustments
Leg Press Option
The Rubber Bumper is
located on the Support Arm
of the Leg Press Option
