Solana Leg Press Option Assembly Instructions
page 8
1
2
3
4
5
6
Step 2. Attach the Seat Fram to the Leg Press
2. Attach the Seat Frame to the
Leg Press
A. Attach the Seat Frame to the Leg Press Base using
two 3¾-inch bolts
four washers
two locknuts
Wrench tighten.
B. Remove the Seat Bracket Support from the Seat
Frame. The holes in the Seat Bracket Support
should face up.
C. Lift the Pop Pin and slide the Seat Bracket Support
back through the Seat Frame. Lower the Pop Pin
and make sure that it engages in one of the holes
in the bracket.
D. Attach the Handle to the Seat Frame using
two 3-inch bolts
four washers
two locknuts
Wrench tighten.
E. Attach the Footrest to the Support Arm. Have an
assistant stabilize the Support Arm while you
attach the Footrest using
one large ½-inch diameter by 3½-inch large bolt
two large ½-inch washers
one large ½-inch self-locking nut
Wrench tighten.
1 - large ½" diameter by 3½" large bolt
2 - large ½" washers
1 - large ½" self-locking nut
E
Seat Frame
A
2 - 3¾" bolts
4 - washers
2 - locknuts
B
Seat Bracket
Support
Seat Frame
D
2 - 3" bolts
4 - washers
2 - locknuts
Flip the Seat Bracket
Support over so that the
holes face up
Pop Pin
C
Footrest
Support Arm
Leg Press Base
Handle