Page 39
Kore 7th Manual / kHLab Edition
If your temperature sensor is connected properly, you will see your:
Actual
,
Lowest
and
Highest
temperature measured by the sensor. By using
Refresh
button you can read actual temperature settings set in “ATO Temp config“ TAB.
You can see there information about pumps activities in actual day (from 00:01 time to
now).
Important!
To initialize connection with doser you should choose proper COM port
and push Connect button. Within a few seconds your computer should
establish connection with your doser. In the Status window you will see:
”
Connected!
and settings refreshed.
Data loaded... Doser ready to use...
”
Now you are connected to the doser and can program and modify settings.
Water temperature
group box
Pump activities
group box
