Y
Y
55
54
WARNINGS
1. For units for use in other than single-family dwellings, a clearly labeled emergency switch shall be provided as part of the
installation. The switch shall be readily accessible to the occupants and shall be installed at least 5 feet (1.52 metres) away,
adjacent to, and within sight of the unit.
2. Any damaged cable must be immediately replaced by qualified personnel.
3. Turn power off before servicing or modifying any cable connections in this unit.
4. To prevent electric shock hazard and/or water damage to this control, all unused bushing conduits must be plugged with the
attached nipple.
5. This controller must not be installed in proximity of highly flammable materials.
6. Low supply voltage or improper wiring may cause damage to this control system. Read and follow all wiring instructions when
connecting to power supply.
7. This pack contains no user serviceable parts. Contact an authorized service centre for service.
8. All connections must be made by a qualified electrician in accordance with the National Electrical Code and any state,
provincial or local electrical code in effect at the time of the installation.
9. Product must be disposed of separately in accordance with local waste disposal legislation.
10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they are supervised and/or have been given instructions concerning use of the
appliance by a person responsible for their safety.
11. Children should be supervised to ensure that they do not play with the appliance.
12. Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
13.
caution
:
in order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the
utility.
14. Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12 v, must be inaccessible to a
person in the spa.
15. Parts incorporating electrical components, except remote control devices, must be located or fixed so that they cannot fall into
the spa.
16. Parts are to be installed in the correct zone and equipotential bonding carried-out in accordance with the wiring rules.
17. Clearance and minimum distance between the various parts of the appliance and the surrounding structure are not specified
as long as they are sufficient so that the ambient temperature around the controller does not exceed 60°C (140°F).
save
these
instructions
Aeware®, Gecko®, and their respective logos are Registered Trademarks of Gecko Alliance Group.
in.ye™, in.yt™, in.keys™, in.touch™, in.k200™, in.k400™, in.k450™, in.k600™, K-19™, K-35™, K-8™, in.k1000™, in.k800™, in.k500™,
in.k300™, in.flo™, in.put™, in.seal™, in.link™, in.t.cip™, in.stik™, heat.wav™, Y Series™, and their respective logos are Trademarks of Gecko
Alliance Group.
All other product or company names that may be mentioned in this publication are tradenames, trademarks or registered trademarks of their
respective owners.
before
installing
or
connecting
the
unit
,
please
read
the
following
.
FEATURES
in.seal provides an extra level of protection against
water infiltration. Connectors and power box are
designed to be watertight (IPX5).
in.seal
watertight protection
in.flo is an all-electronic dry-fire protection that is
built on the heat.wav heater. The in.flo eliminates
the burden of adjustments, calibrations and failures
associated with usual water flow sensors.
in.flo
dry-fire protection
in.t.cip is an intelligent water temperature refresh
algorithm that calculates optimal time to start
pumps and get water temperature readings.
in.t.cip continuously readjusts the heater start
time (according to exterior temperature).
in.t.cip
water temperature algorithm
The Y Series offers the kind of simplicity that makes for a genuine top-of-its-class product. It is the natural choice for anyone who
wants an easy-to-understand multi-application solution.
You don’t have to wonder about compatibility; instead, there’s just the comforting certainty that when you invest in the Y Series,
all spa configurations are supported. What’s more, it also takes into account future compatibility, so you can have peace of mind
knowing that you can enjoy your spa pack for years to come.
The Y Series systems boast a long list of technical features. Each of them contributes to bringing the most advanced solutions
available to Y Series equipped spa owners:
The in.stik is a pen drive with an in.link connector,
very similar to a USB memory stick. It connects
to the spa pack and contains data to program or
configure its system. The system executes the
data upload automatically.
in.stik
automated software upload
All Y Series packs support the in.touch WiFi
interface, allowing you to use your favourite iOS
device to communicate with your spa.
in.touch
you're always in touch with your relaxation
The Y Series is only compatible with the low-voltage
family of in.link connectors, such as those used by
keypads and similar low-voltage accessories.
in.link
ingenious plugs and connectors
in.put was designed to ease wire insertion
(up to # 4 AWG) and connections. Tighter input
connection reduces heat generated for increased
component lifetime.
in.put
input terminal block
14
14
