5
5
33
32
6
6
Maintenance
(version 7.00 and higher)
From the Settings page you can access the
Maintenance menu, which gives you access to the
following options:
∙ Maintenance Reminders
∙ Standby
Use the Up and Down keys to make a selection,
and Light key to confirm.
Maintenance Reminders
(version 7.00 and higher)
The in.k500 keypad will remind you of maintenance
required on your spa, such as rinsing or cleaning the
filter.
Each task has its own duration, based on normal use.
The Maintenance Reminders menu allows you to
verify the time left before maintenance is required, as
well as to reset the time once a task is completed.
Use the Up and Down keys to move through the list.
To reset a task, select it by pressing Light key, then
confirm when prompted . Once you have confirmed,
the task will be reset.
Audio
The in.k500 can be used with the in.stream 2, in.tune
or in.stream audio systems. The Audio section in the
Settings menu of an in.stream gives you the option to
disconnect or unpair your Bluetooth enabled device
when using the in.stream.
With version 7.00 and higher, it is also possible to
select Source to use a device connected by auxiliary
cable or Bluetooth wireless connection.
Standby
(version 6.00 and higher)
The Standby mode allows you to service your spa.
Pumps will stop for 30 minutes, and automatically
restart after this time.
Once Standby mode has been activated a screen will
appear to show that pumps are stopped. The normal
Spa page will return at the end of maintenance.
Press on the Light key to leave Standby mode and
restart the spa.
Note: In version 6.00 only, Standby mode is
accessible directly from the Settings page.
Date & Time
Here you can adjust the time format, change the year,
date and time. Use the arrows to choose the setting
that you want to adjust, and select it by pressing
the Light key. Use the arrow buttons to change the
parameters, and the Light key to move between
parameters.
Key 1 will take you back to the main Settings menu.
Note: In version 6.00 and earlier, only the day of the
week can be changed, not the year or date.
Keypad Settings
In this section, you can change the temperature
unit, language, display orientation, rim light colour
and keypad security. Note the spa pack must be
configured accordingly to be able to change the
rim light colour.
When you change the display orientation, the
contextual options and arrow keys adjust to the
chosen orientation. The Mode and Menu keys
remain unchanged, as well as the accessory keys
in the main spa menu.
If the RGB backlight option is enabled in the spa
configuration, an option will appear to allow selection
of the keypad rim light colour. (If the in.k500 is
equipped with a selectable rim light colour module.)
You can lock the keypad by selecting one of three
security levels: Unlock, Partial or Full. The Partial level
locks the set point adjustment and many options in
the settings menu. The Full level locks all keypad
functions. To unlock the keypad (either Partial or Full)
press and hold the Light key for five seconds.
in.tune
Press the Mode key to access your in.tune.
Play/Pause Audio
Press the Play/Pause key to start or pause the audio.
Adjusting the Volume
Press the Up or the Down key to increase or
decrease the volume.
Changing Tracks
Use the Last Track and Next Track keys to change
tracks for the CD or Aux input. When in Radio
mode, the Last Track and Next Track keys will move
through preset radio stations on the selected band.
To change bands or preset stations, see your in.tune
manual.
Turn Power On/Off (version 7.00 and higher)
Press and hold the Play/Pause key for three
seconds to turn the in.tune on or off.
in.stream
Press the Mode key to access your in.stream.
Play/Pause Audio
Press the Play/Pause button to start or pause the
audio
Adjusting the Volume
Press the Up or the Down key to increase or
decrease the volume.
Changing Tracks
Use the Last Track and Next Track keys to change
tracks
Disconnect or Unpair Bluetooth
These options can be found under the Audio section
in the Settings menu.
Turn Power On/Off
(version 7.00 and higher)
Press and hold the Play/Pause key for three
seconds to turn the in.stream on or off.
in.stream 2
(version 11.00 and higher)
Press the Mode key to access your in.stream 2.
Play/Pause Audio
Press the Play/Pause button to start or pause the
audio. This button is available for Bluetooth and
USB only.
Adjusting the Volume
Press the Up or the Down key to increase or
decrease the volume.
Turn Power On/Off
This option can be found under the Audio section in
the Settings menu.
Changing Tracks
Use the Last Track and Next Track keys to change
tracks or FM stations. This is not available with Aux
source.
Disconnect
This option can be found under the Audio section in
the Settings menu.
Fader, Balance and Subwoofer
These options can be found under the Audio section
in the Settings menu.
About
This section shows information about the in.k500
software number, and the revision numbers of the
different components of your system.
The in.stream 2 Settings menu gives you a Source
selector, a Bluetooth disconnect option, an On/Off
switch and an audio control on Fader, Balance and
Subwoofer.
The Audio option will only appear in the menu for
keypads that are set up for an in.stream connection.
The in.stream 2 is automatically detected at power-up.
