For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
SKU 95672
PAGE 9
HIgH PRESSURE HOSE
(32)
ADJUSTABLE LAncE (33)
TURBO LAncE (34)
LAncE gUn (31)
ATTAcH
QUIck cOnnEcTOR
gARDEn HOSE ADAPTER (35)
AnD gARDEn HOSE
(nOT IncLUDED)
TO
InLET PORT (30)
OUTLET PORT
(26)
AccESSORY HOLDER
(36)
POWER SWITcH (13)
DETERgEnT TUBE
(27)
FIgURE B
ScREW (15)
ScREW (15)
ScREW (15)
ScREW (15)
Attach the Accessory Holder (6) to the Cart Handle (9) by inserting the prongs of
the Accessory Holder into the holes located in the upper/rear portion of the Cart
Handle.
Insert the Pressure Washer accessories into the Accessory Holder (6).
Attach the Adjustable Lance () to the Lance Gun (1) by inserting the tip of the
Lance into the Gun Collar. Then push in firmly and rotate to secure the Lance to
the Lance Gun. Pull on the wand to ensure it is properly attached to the gun.
The Turbo Lance (4) can be attached to the Lance Gun (1) in the same manner,
by pushing in the accessory and rotating to secure the Lance to the Lance Gun.
Remove the protective plastic caps from the unit’s water Inlet Port (0) and water
Outlet Port (26).
(See Figure B.)
Ensure the inlet water strainer is free of debris.
Firmly attach the Quick Con-
nector Garden Hose Adapter (5) to the water Inlet Port (0).
(See Figure B.)
Firmly attach the High Pressure Hose (2) to the water Outlet Port (26).
.
4.
5.
6.
7.
8.
9.
