For technical questions, please call 1-800-444-3353.
SKU 95672
PAGE 19
If the steps above do not solve the problem or if the repairs involved are too
complex, contact a qualified technician.
IMPORTAnT!
Be cERTAIn to shut off the Pressure Washer, release all pressure in a safe manner, and
disconnect it from power and water before adjusting, cleaning, or repairing the unit.
Pressure washer does not build pressure
check that hose is unbent and
Inlet Screen is free from debris
and deposits.
HOSE IS nOT kInkED AnD
ScREEn IS cLEAn
HOSE IS kInkED
OR ScREEn IS
cLOggED
clean Screen and
straighten hose .
Switch to a shorter
hose, if possible.
Air may be getting in the
water supply hose, check all
connections.
ALL cOnnEcTIOnS
ARE TIgHT
cOnnEcTIOnS
ARE LOOSE
Retighten
connections.
Internal valves, seals, or the
nozzle may be worn, contact
a qualified technician.
Troubleshooting
(continued)
Dry self thoroughly and check the
voltage at the outlet, and the reset button
on the gFcI power plug (explained under
Controls and Features,
#2 on page 11).
POWER SUPPLY
InADEQUATE
RESET BUTTOn nOT
SET cORREcTLY
Have a cer tified
electrician correct
the problem.
Setup the gFcI plug
as explained on page
11.
contact a qualified
technician
Pressure Washer will not start
POWER SUPPLY
ADEQUATE AnD RESET
BUTTOn SET PROPERLY
