30
CARDIO PROGRAMS (cont’d)
•
In C5 (Interval HRC), you can adjust the intervals to any one of 5 settings. The treadmill automatically alternates your heart rate
between 56% to 71%, 59% to 74%, 62% to 77%, 65% to 80%, or 68% to 83% of your theoretical maximum, in five minute timed
intervals (2 minute @ high % and 3 minute @ low %).
Step Nine:
Press the
button. After the warm up phase, you will see a graphic depiction of a heart and a
⊥
(the On-Target Indicator) in the
PROFILE display window. When your heart rate is at the target the
⊥
(On-Target Indicator) will be centered under the heart depicted in
the Profile display. Correspondingly, when the heart rate falls below target the
⊥
(On-Target Indicator) will move to the left of center and if
the heart rate exceeds the target the
⊥
(On-Target Indicator) will move to the right of center.
NOTE:
Any speed or incline changes made by the user during the program will become the new max for the entity changed.
TIP:
During your program if you press and hold either
Avg Speed
Heart Rate
Distance
or
Calories
Aerobic Pts
Pace
until the word “SCAn” appears, each respective value will
be displayed for 3 seconds on a rotating basis. To turn off scan, just press the button.
TIP:
Because the warm up and cool down phases are an essential part of your workout, they cannot be deleted prior to beginning a Heart
Rate program. You will automatically advance into your main program as soon as your heart rate reaches the target or at the end of the 5-
minute warm up, whichever occurs first. If you choose to bypass the warm up phase, after you press the START button, you can proceed
into the main program by pressing the
(USER ID)
button once.
Your program will end when the timer has counted down to zero or the STOP button has been pressed. The treadmill will display total time,
current heart rate, calories expended, Aerobic Points earned, elapsed distance and average speed. The PROFILE display window will
show a graphic review of your program. For details, refer to the Performance Review section in this manual.
If a problem should occur, the treadmill can be stopped quickly by pulling on the magnetic safety cord to dislodge the key from the control
panel. The treadmill will stop a bit more abruptly, but still gently enough to prevent you from being injured.
This is an emergency
procedure only and should not be used as the normal stopping procedure.
CAUTION: The treadmill must be at 0 % Incline BEFORE it will lock in the folded position.
