System Operations Manual
www.paceworldwide.com
Page 18 of 40
x. Image in the window should be aligned like figure 12.
Figure 12
xi. If it is not, adjust prism until it is.
1. Loosen the setscrews from the light adjustment knobs (Figure
13)
2. Remove
the
knobs
3. Remove the four screws (2 on each side) from the cameras’
sheet metal cover (Figure 13)
4. Remove
the
cover
5. Loosening the top screws (A) and tightening the bottom screws
(B) adjusts the prism down.
6. Loosening the bottom screws (B) and tightening the top screws
(A) adjusts the prism up.
7. Loosening the right center screw © allows you to rotate the prism
around the y-axis.
8. Replace the cover
9. Replace the four screws
10. Replace the knobs
11. Adjust the light adjustment knobs and tighten the setscrews
xii. Return to setup screen. Mouse click on button, “Return to Setup.”
