©2013 PACE Inc., Southern Pines, NC
Page 5 of 31
All Rights Reserved
Vacuum Pick Switch
- Activates & deactivates vacuum pump supply to
the Vacuum Pick Assembly. Switch must be depressed for a period of
0.5 second before circuit deactivation; activation is immediate.
CYCLE SWITCH
- Activates reflow cycle (heat & airflow). Switch
must be held to maintain activation in Manual Mode; in Timed &
Program Modes, switch is pressed & released to initiate set cycle
time. Switch can be used to abort cycle in Timed or Program
Mode operation.
VACUUM PICK ADJUST CONTROL
– Provides adjustment for
height of Vacuum Pick Assembly (& Vacuum Cup). Turn clockwise to
raise pick or counterclockwise to lower pick.
VACUUM PICK ASSEMBLY
- Provides a means to lift or
place components.
HEAT SHIELD
-Protects the operator from unintentional
contact with the heater.
VACUUM CUP
- Provides positive holding of components for positioning
during the replacement process and for lifting of the component during the
removal process.
NOZZLE ASSEMBLY
- Directs heated air from the heater
assembly to the solder joint areas for soldering or
desoldering of components. Nozzles are optional parts
ordered for a specific application.
QUICKFIT NOZZLE ADAPTER
- Allows quick nozzle
attachment and release.
