Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
11
PICO-155S Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
!
!
2.3.6 Installation
Sample fixture can be positioned
differently with respect to the
blade.
Note: For soft or gummy
materials it is recommended
that the sample be positioned
on the back side of the blade.
This will reduce the tendency
of the sample to jam the blade.
Machine can run at either 110V or 220V
power.
Connect the electrical plug and activate the
on main power switch (note the hood must
be closed for power to turn on at the front
panel). Verify that the emergency stop
switch is deactivated and the system will be
ready for operation.
Turn emergency
switch clockwise to
release
Power
switch
The power receptacle is equipped with a fuse
holder that takes a 3 amp fuse if running the
machine at 110v or a 1.5 amp fuse if running
at 220v.