Pace Technologies NANO 1000T, Инструкция по эксплуатации

Страница: 17 / 105

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
13 Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
NANO 1000T / FEMTO 1500
Polishing Head
Specimen
holder height
adjustment: Step 7. In the FEMTO manual mode, lower pistons with the down button.
Verify that the bottom of the piston is not rubbing against the abrasive
surface. (Note it is better to operate the specimen holder as close to the
working abrasive wheel as possible in order to get flatter specimens
Installation (continued)
.8 Height Adjustment for FEMTO Head /Specimen Holder (continued)