Pace Technologies NANO 1000T, Инструкция по эксплуатации

Страница: 40 / 105

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
36 Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
NANO 1000T / FEMTO 1500
Polishing Head
CLASS 1 Polishing Procedures
5.11.1 Aluminum and Aluminum Alloys
Aluminum and aluminum alloys are difficult to prepare because
they are soft and contain oxide particles which can become
dislodged and scratch the surface. The key to polishing aluminum
is to use very fine polishing abrasives (fine aggregates).
Abrasive/surface Lubricant
FEMTO pressure
setting (psi)
Time Head / Wheel speed
P120 grit ALO paper*
P220 grit ALO paper* Water
60-75 200 rpm / 200 rpm
Until plane
1 minute
P220 grit ALO paper
P500 grit ALO paper
P1200 grit ALO paper
Water
60-75
Until plane
1 minute
1 minute
200 rpm / 200 rpm
1 um DIAMAT diamond on
ATLANTIS pad DIALUBE Purple
Extender
60-75 2 minutes 200 rpm / 200 rpm
0.05 um Nanometer alumina on
NAPPAD pad
60-75 1 minute 100 rpm / 100 rpm
Aluminum-Silicon Alloy, B.F. 200X Aluminum-Silicon Alloy, B.F. 200X
* Recommended for Central Force holders (this step not required for Individual Force holders)