Paccar Winch BRADEN H20R, Инструкция по установке, обслуживанию и ремонту

Страница: 18 / 31

17
OUTPUT PLANET CARRIER
DISASSEMBLY
1. Remove the planet gears by driving the roll pins into
the center of the planet shafts.
2. Use a punch to drive the roll pins from the planet
shafts. Do not reuse the roll pins.
3. Now you can remove the planet shafts, bearings,
spacer, thrust washers and gears. Thoroughly clean
all parts and inspect for damage and wear. The
bearing rollers should not exhibit any irregularities. If
the rollers show any sign of spalling, corrosion, dis-
coloration, material displacement or abnormal wear,
the bearing should be replaced. Likewise, the cage
should be inspected for unusual wear or deforma-
tion, particularly the cage bars. If there is any dam-
age that will impair the cage’s ability to separate,
retain and guide the rollers properly, the bearing
should be replaced. The thrust washer contact
areas should be free from any surface irregularities
that may cause abrasions or friction. The gears and
shafts should be inspected for abnormal wear or pit-
ting. Replace if necessary.
ASSEMBLY
1. Place the output planet carrier on workbench with
splined coupling side down. Install output thrust
plate in center of carrier.
PLANET CARRIER SERVICE