Pacbrake is a registered trademark of Pacbrake Co.
11
HP10216 AMP AIR SUSPENSION KIT
L6360
ECN 1-1789
L6360_Rev4_17.07.2018
10A
10
CHECK SYSTEM FOR LEAKS
• Inflate both air springs to 90 PSI, and then use a mixture of dish soap
and water on all air line connections to detect any air leaks. Repair as
necessary and retest.
• Inflate the air springs to a predetermined value, and on the following
day recheck the pressure. If one or both the air springs have lost
pressure, an air leak is present. The leak must be repaired, and then
retested until no leaks exist.
11
AFTER THE INSTALLATION IS COMPLETED, PLEASE
REMEMBER:
• Install the wheels, and torque the fasteners to the manufacturer’s
specifications.
• Re-torque all the fasteners after the first 500 miles of driving.
• For safe and proper operation, never operate the vehicle under the
minimum of 10 PSI or over the maximum of 100 PSI. Staying within
the pressure limit will ensure maximum air spring life. Failure in doing
so may result in a void warranty (see Note below).
OPTIONAL ACCESSORIES
Pacbrake offers an optional dual needle air gauge to monitor the pressure in each spring from the vehicles cab.
Pacbrake offers a full line of air compressors, air tanks and solenoids to control your air spring system.
OPERATING YOUR VEHICLE WITH PACBRAKE AIR SUSPENSION
Air springs have minimum and maximum pressure requirements. Never operate your vehicle with less than 10 PSI in
the air spring and never inflate the air springs over 100 PSI. Damage to the air springs will result.
Check the air pressure in the air springs daily for the first couple of days to ensure a leak does not develop. The air
springs are designed to maintain the vehicles stock ride height with a load. Do not use the air springs as a means to lift
the vehicle with no load. A rough ride will result.
SERVICING YOUR VEHICLE WITH PACBRAKE AIR SUSPENSION
When lifting the vehicle with a floor jack or hoist on the frame, never allow the air spring to limit the travel of the axle.
Try to always jack the vehicle on the axle. Suspending the axle with the air spring limiting the axle travel will damage
the air spring and void the air spring warranty.
WARRANTY
To be eligible for warranty, owner must submit their warranty card or register online within 30 days of purchase date.
NOTE:
The owners warranty will be void if air springs run with less than the minimum of 10 PSI.
