PAC STORAGE PS 4000 Gen2 Series, Руководство по оборудованию

Страница: 48 / 108

2-22 Chapter 2: Hardware Installation
3. Insert the SFP module into one of the system host ports. The module will snap into place.
NOTE: The drawing of the controller is for reference only. Look for the actual system host ports in your
PS 4000 Gen2 system.
4. Remove the two protective caps from the LC-to-LC type cable. Save the protective caps for future
use.
Protective caps
5. Insert the LC-to-LC cable to the SFP transceiver module already connected to the system. You can
hear a clicking sound, securing the cable in place.
NOTE: The drawing of the controller is for reference only. Look for the actual system host ports in your
PS 4000 Gen2 system.
6. Remove the protective caps on the other end of the cable, then connect to an SFP transceiver
module on a Fiber Channel switch port or a Fiber Channel HBA (host bus adapter) port.
LC-to-LC cable