PAC STORAGE PS 4000 Gen2 Series, Руководство по оборудованию

Страница: 43 / 108

PS 4000 Gen2 Series Hardware Manual 2-17
5. Use the guide pin to position the new host board to the host board slot, place it carefully (A), then
tighten the thumb screws to secure the host board in place (B).
Guide pin
6. Insert back the controller carefully into the module slot (A). When you feel a contact resistance, use
a small but careful force and push the ejection levers upwards to secure the controller into chassis
(B).
7. Secure the controller to the enclosure with the retention screws. Reconnect the cables to the
controller module.