PAC STORAGE PS 4000 Gen2 Series, Руководство по оборудованию

Страница: 31 / 108

PS 4000 Gen2 Series Hardware Manual 2-5
Slide Rail Kit Contents
Check your slide rail kit for the following contents.
1 x Mounting bracket
assembly, left side
1 x Mounting bracket
assembly, right side
2 x Inner glides
6 x L4 No. 6-32
flathead screws
8 x 9.0 mm M5
truss head screws
4 x M5 cage nuts
4 x 25 mm M5 screws
4 x 25 mm M6 screws
4 x 25.4 mm
No. 10-32 screws
Assembling the Slide Rail Kit
To assemble the slide rail kit:
1. Determine the position where the enclosure will be installed to the front and rear rack posts, then
insert the cage nuts into the designated holes on the front rack posts and the truss head screws on
the front and rear rack posts.
Front rack post
Unit boundary
Rear rack post
9.0 mm M5
3U/4U, M 5 cage nut position
2U, M 5 cage nut position
Unit boundary
9.0 mm M5
2. Loosen the four screws on the slide rail to adjust the length. After the length adjustment, secure the
slide rails to the front and rear rack posts with the 9.0mm M5 truss head screws. Tighten the four
screws on the slide rail to fix the length.
9.0 mm M5
screws
9.0 mm M5
screws
Inner glide rail