PAC STORAGE PS 4000 Gen2 Series, Руководство по оборудованию

Страница: 103 / 108

PS 4000 Gen2 Series Hardware Manual 4-17
4. Install the replacement hard drive to the drive tray, then insert the assembled hard drive and drive
tray to the bay with the spring handle open.
5. When the tray is fully inserted to the bay, close the spring handle.
IMPORTANT! Ensure that there is no more drive error reported.
Replacing the Hard Drive into the Drive Bay and Enclosure (for PS 4025 Gen2 System
only)
To replace the hard drive:
1. Identify the faulty hard drive using the PAC Mgmt. Software.
NOTE: See section Hard Drive Designation for the order of the drive bays.
2. When the faulty hard drive is located, push the release button to eject the drive tray, wait for 30
seconds for the drive to spin down, then pull out the tray using the spring handle.