---------------------------------------------------------------------------------------------------------------------------------
13
4.3.2 Select C.O.line charge mode
Format: 0 3 0 0 # to set reverse charging mode
Description: To set system charge mode into reverse charging mode,while detecting the
reverse
signal
(Provide by telecom company) for the charge list start time, after the PABX
have detected the reverse signal, it will generate the charge list.
Format: 0 3 T T # to set delaying mode
Description: Select all C.O.line to charge mode of Delay billing, TT – delay time (01-99 sec.),
which is from finish dialing to the system start to charge
Default setting: Duration of time-delay being 5 seconds.
Example: Setting delay time: 20s, input: 0320#
Format: 0 4 0 0 # Clear system’s storage of all charge list
Description: Clear the charge list stored in system memory.
NOTE:
system can store more 3000 items charge list in PBX when power off.
4.4 Day / Night Mode & Weekend Mode Setting
4.4.1 Day/night Mode Setting
Format: 0 4 0# Set day/night mode to automatically mode
0 4 1 # Set day/night mode to manual mode
0 4 2 HH TT # day mode start time, HH-hour (24), TT-minute
0 4 3 HH TT # day mode end time, HH-hour (24), TT-minute
0 4 4 0 # Enable auto-attendant (OGM) in day and night
0 4 4 1 # Enable auto-attendant in day (means in night is operator mode)
0 4 4 2 # Enable auto-attendant in night (means in day is operator mode)
: 0440#,0441# ,0442# setting must be used after set Operating mode ( refer 4.7.3 or 4.7.4 )
to auto-attendant.
Example: Set day/night mode to automatically mode, Day mode start time is 08:30 and end time
is 18:00.And CO line 1 to 11 and CO line 13 to 15 is operator mode in day , is
auto-attendant mode in night, CO line 12
、
16 is operator mode in day and night.
then you should input 10#, 1112#
,
1116#
,
0420830#, 0431800#, 040#, 0442#
。
4.4.2 Weekend Mode Setting
Format: 0 4 8 0 # enable weekend mode function
0 4 8 1 # disable weekend mode function, this is default setting