Call Hold and Resume
To place a call on hold:
To resume a call, do one of the following:
If there is only a call on hold, press the
Resume
soft key.
Press the
Options
soft key during a call, and select
Hold
.
If there are two calls on hold, press the
Resume
soft key to resume the current call,
press the
Swap
soft key
to swap between the two calls.
Call Forward
Call Transfer
1. Press the
Options
soft key during a call, and select
Transfer
.
2. Enter the number you want to transfer the call to.
3. Press
To enable the call forward feature on a specific line:
Always----
Incoming calls are forwarded immediately.
Busy----
Incoming calls are forwarded when the handset is busy.
No Answer----
Incoming calls are forwarded if not answered after a period of time.
1. Press the
OK
key to enter the main menu, and select
Call Features
->
Call Forward
.
3. Press or to highlight the desired forwarding type, and press the
OK
soft key.
5. Enter the number you want to forward the incoming calls to in the
Target
field.
7. Press the
Save
soft key to accept the change.
4. Press the
Transfer
soft key after the call is answered.
2. Press or to highlight the desired line, and press the
OK
soft key.
4. Select
Enabled
from the
Status
field.
6. Press
or
to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the
After Ring Time
field.
Call Mute
Press
during a call to mute the call.
Press
again to un-mute the call.
Configuring your Phone
IP DECT Phone
or the
OK
key to dial out.
W52
You can transfer a call in the following way:
Quick
Site
Guide
