---------------------------------------------------------------------------------------------------------------------------------
15
use trunk line1, then line2, line3,….line8,circulating). This setting can avoid the
user always use some trunk lines.
this is default setting.
Format: 0 6 2 1 #
Description: This setting make the system use trunk lines in sequence, it means the system
always choose the trunk line of lower number if available. (line 1 is the lowest
number)
4.6 Setting Operating Mode
NOTE: All the C.O.lines are in operator mode in default setting, the operator ringing
extension is 601 and 602.
4.6.1 Setting Auto-attendant Mode (OGM) for C.O. line
Format: 1 0 # All the C.O.lines in Auto-attendant Mode
10M# C.O.Line M in auto-attendant Mode
Description: allows the C.O. lines in Auto-attendant Mode (DISA --Direct Inward System Access
status). In this mode, Caller will hear the OGM recorded message, while all
extensions are in MUTE mode
1. If the caller doesn’t know the extension number, he cans inquiry the operator (The default
mode is Ext.602) by dialing “0”.
2. Outgoing Message must be record when setting this mode.
4.6.2 OGM Busy Process in Auto-attendant Mode
Format: 1 5 4 0#
Description: when external call in and the OGM is busy ,then system is waiting,this is default
setting.
Format: 1 5 4 1#
Description: When multiple extennal lines calling in, because auto-attendant just one or two
lines, some one external line calling just can be waiting, the system can be set to ring
the operator mode ringing extension(setting refer 4.10.2 & 4.10.3) and will not lose
any calling.
4.6.3 Setting Operator Mode for C.O. line
Format: 11# allows all the C.O. lines in Operator mode,
this is default setting.
11M# allows the No.M C.O. lines in Operator mode.
