P3 International V3, Руководство по настройке

Страница: 8 / 13

Pr0.5 = Boost rounded down to nearest 1/2 unit
Pr 0 = Boost rounded down to nearest whole unit
Shift Light Setting
SL.80 = Shift light set to 8000 RPM. Can be set from "SL.30" to "SL.90" (3000 RPM to 9000 RPM)
Temperature Units Setting
dEg.F = Temperature shown in Fahrenheit
dEg.C = Temperature shown in Celsius
Speed Units Setting
SP.E.Y = Speed shown in MPH
SP.E.n = Speed shown in KMH
Speed Calibration Setting
SC. 0 = 0% change to raw speed in ECU. Can be set from "SC.-9" to "SC.20" (-9% to +20%)
Display Dimmer Setting
d. On = Default, display will be in "bright" mode each time vehicle is started
d.On.A = Auto-dim, if more than 5 volts is sensed on green dimmer wire the display will dim. If
less than 5 volts is sensed on the green dimmer wire the display will be in "bright" mode.
d.On.P = Persistent, display will stay in "bright" mode until the user manually changes to "dim"
mode and vice versa
Power Control Option
pCo.A = Automatic, the gauge will turn on and off with engine
pCo.b = Button, the gauge will not turn on after engine is started until the left button is pressed
for 1 second (pressing right button for 1 second will show battery voltage)
pCo.S = Switched, the gauge will be on as long as it is connected to power
OBD2 / Analog Mode Setting
Obd2 = The gauge will communicate over the vehicle network to pull data from the ECU
AnLg = The gauge will only use the OBD2 port for power and gound. It will not communicate on
the network and will only be able to read battery voltage and the 3 analog inputs