P3 International V3, Руководство по настройке

Страница: 13 / 13

P3 V3 Troubleshooting Checklist
1 - Start your engine

Your gauge is designed to turn on and off with your engine automatically. Start your
engine, your gauge should power up within a few seconds of startup.
2 - Check your connections

OBD2 port connection

OBD2 harness to Main harness connection

Main harness to Control box connection

Control box to display connection
3 - Check your configuration settings

With your engine off HOLD both buttons until you see "ConF" then release (the gauge
will then switch to the "d.t.c." setting)

TAP the RIGHT button once and write down what the gauge displays (it should be your
boost setting - "bSt.x")

TAP the RIGHT button again and write down the next setting
 Repeat steps 2-3 until you have written down all the settings

Compare your settings with the settings listed for your vehicle in the configuration chart

Adjust your settings, if necessary, by TAPPING the LEFT button once you are on the
setting that needs changed

HOLD the RIGHT button until the screen turns off to save/exit the configuration menu

Start your engine to retest functionality

If your gauge still does not function properly, include the list of settings you wrote down
in your support request - we will need this list in order to assist you
4 - OBD2 Fuse

If you have verified your connections and still cannot enter configuration mode check
your OBD2 fuse (reference your vehicle's owner manual for fuse identification)