P3 International V3, Руководство по настройке

Страница: 5 / 13

1- HOLD both buttons until "ConF" appears and then release. (screen will then change to
"d.t.c.")
2- TAP the left button (code(s) will then be displayed one at a time)
CODE CLEARING: To clear codes you will need to follow the steps listed below -
1- Make sure your vehicle is KOEO (key on, engine off)
2- HOLD both buttons until you see "ConF" appear (display will then automatically switch to
"d.t.c.")
3- HOLD the left button until "CLrd" is displayed. (display will show "HoLd" while holding the
button and then switch to "CLrd" once clearing is completed)
(In some situations a code clear may be completed while the engine is running but KOEO is
recommended)