P1PE P72800A, Руководство пользователя

Страница: 8 / 32

2.5. Rubber feet assembly.
Using the bolts supplied attach the brackets with the rubber feet on to the frame. Insert the bolts from
the outside of the unit towards the inside and secure the bolts with the cap nuts provided using 10mm
wrenches. Do not over-tighten. A second person should steady the frame for this step. Repeat the
process for both feet.
2.6. Axle and wheel assembly.
Place large diameter washer on to the axle shaft and insert the axle into the wheel/tyre assembly as
shown, you may have to use a rubber mallet to tap the axle through the wheel opening.
Slide the axle wheel assembly onto the frame assembly and place a washer onto the axle and
secure with a supplied nut. Tighten using suitable spanner and socket. Tighten securely but DO NOT
overtighten. A second person should steady the frame for this step.
Page 8 First edition - April 201 7