P1PE P72800A, Руководство пользователя

Страница: 17 / 32

reliability of this machine prior to any operation.
5.2 Using the machine.
ALWAYS Start slowly with half throttle and keep a firm grip on lance.
5.2.1. Before starting the machine you MUST connect to and turn on a water supply and high
pressure hose to the machine, connect the lance and trigger assembly.
5.2.1. Nozzle selection. The machine is supplied with 5 nozzles. Red/Yellow/Green/White and
Black. With the exception of the Black (soap nozzle) they all give a different spray pattern.
0° - Pin point, for use on hard/embedded
dirt/grime on brick/ concrete patios
surfaces
15 °/25 ° - Concentrated to optimize
cleaning power and time, for use on paint
stains, oil, dense dirt and mildew. On
wooden decks, walls, drives and patio
surfaces.
40 ° - Efficient for general cleaning power,
for use on general loose dirt/grime paint
stains, oil, dense dirt and mildew. Can be
used on most surface such as cars, wooden
decks outdoor furniture and patios
Soap injection – Used to apply cleaning
solutions to surfaces recommended by
detergent supplier. Can be us ed to prepare
all surfaces to provide th o rough cleaning.
5.2.2. The quick–release on the lance allows you to switch between five different quick-release
nozzles. DO NOT change nozzles whilst the lance trigger is operated. Pull back the collar on the
quick release mechanism and remove the nozzles and fit the desired nozzle.
5.2.3. Cleaning tips. Before cleaning you are advised to jet wash a test area first and only when
you are happy with the results should you proceed with the current task.
5.2.3.1. For most effective cleaning, keep nozzle from 8 to 24 inches away from cleaning
surface.
5.2.3.2. If you get nozzle too close, especially using a high pressure nozzle, you may
damage surface being cleaned.
5.2.4. Using black soap nozzle.
Page 17 First edition - April 201 7