P1PE P72800A, Руководство пользователя

Страница: 19 / 32

Always stop the engine and unplug the spark plug before doing any repairs or maintenance.
Never touch the rotating nylon cord or blade.
Check and maintain fuel & oil levels regularly, and maintain the correct levels.
Frequently check at regular intervals for the tightness of all nuts, bolts and screws.
If the machine vibrates badly stop the machine and take it to a service dealer.
Always refuel in a well-ventilated area with the engine off and spark plug HT cap removed.
Whilst carrying out maintenance you must wear appropriate Personal Protective Equipment
(PPE). Suggested PPE Sturdy footwear, work gloves, long trousers and hearing protection.
NEVER use the pressure washer to clean itself. Water can penetrate the power unit and
cause damage the engine. The use of pressure washers will result in shortened life and
reduce serviceability. Shut down the engine, wait for all moving parts to come to a complete
stop, remove HT lead, and then wait for 5 minutes before performing maintenance on the
pressure washer.
Guards and Shields: Make sure all guards and shields are replaced after servicing the pressure
washer. Keep your pressure washer upright: Never lay your pressure washer on its side while
moving, storing, or using it. Oil could leak and damage your pressure washer’s engine and
surrounding areas. You MUST comply with local and current regulations that apply to the use
of your pressure washer. There may be additional regulations that apply if your pressure
washer is used on construction sites.
ITEM FREQUENCY
Remove dust/debris accumulation As needed or required
Inspect fuel and spray system
Each use
Clean inlet filter Each use
Check tyre pressures Each use
Perform engine maintenance
(Refer to Engine Owner’s Manual)
Change engine oil: As specified in the Engine Owner’s manual.
•
After first 5 hours of use
• Every year or 100 hours of use after first use.
Perform pump maintenance
(Refer to Pump Owner’s Manual)
Change pump oil: As specified in the Pump Owner’s manual.
•
After first 50 hours of use
•
Every 3 months or 500 hours of use after first use.
PARTS
If a part needs replacement, only use parts that meet the manufacturer’s part number
specifications. Replacement parts that do not meet specifications may result in a safety
hazard or poor operation of the Pressure Washer and will VOID the warranty. Major Service,
including installation or replacement of parts, should be made by a qualified service
technician.
Page 19 First edition - April 201 7
6. MAINTENANCE
N.B. AR Axial pump are sealed for life-no oil changes required.