MF-230 Troubleshooting & Web UI Configuration Guide v1.0
32
Apply
To Save the Port Forwarding Rule or to Save the changes that
has been done. After this, you will need to reboot the router.
Troubleshooting:
If you are not able to set Port Forwarding or make it works:
•
Make sure the Port Forwarding range in both “WAN” and “LAN” is not more or
equal to 900. For example the range must be 30000 to 30899, and not 30000 to
30900.
•
Make sure the intended computer IP for the Port Forwarding on the LAN Side is
the same IP as you set in the Web GUI
Server IP Address
•
Make sure that the intended computer has turned off any Firewall programs and
allow the Ports that have been set in the router Port Forwarding rule.
•
A Port can only be used by ONE program at a time. This means that you can only
use Port 500 on ONE computer on the router at a time. Using Port 500 on two
computers at the same time would violate the ONE program rule, and your data
would get messed up.
•
Make sure you know and set the correct Ports for “WAN” and “LAN” in your Port
Forwarding rules as this is always the common mistake.
