P.S.I TireView, Руководство по установке и обслуживанию, Страница: 34 / 35

Section 1 - TireView
™
TPMS Instruction Manual
Issue Solution
Visually inspect the tire for damage or defects. Check
the tire pressure as this can affect tire temperature. If
necessary, have the tire serviced or replaced.
There may be a high or low pressure reading from
a tire position. Tire pressures will change over time
from environmental conditions. Make sure the tire
pressures are correct. Make sure the alarm values are
set correctly. See Setting the Sensor Alarms on page
22.
The trailer is not being used, but is still showing on the
TPMS display.
To remove a trailer from the display, see
Connect / Disconnect A Trailer from the TPMS Display
on page 27.
The tractor is not being used, but is still showing on the
TPMS display.
To remove a tractor from the display, see
Connect / Disconnect A Tractor from the TPMS Display
on page 27.
The display still shows a tire position that is no longer in
use.
To delete a single sensor code, see
Delete a Sensor ID Code
on page 19.
© Pressure Systems International Inc.
All rights reserved worldwide.
34 T004-01 Rev 06-19