P.S.I TireView, Руководство по установке и обслуживанию, Страница: 24 / 35

Section 1 - TireView
™
TPMS Instruction Manual
Figure 12: Low Pressure Set Parameter Screen
6. Press the GO button to scroll/cycle to the next axle.
Note: At the trailer section of the display, all the tires will flash. All the trailer axle low pressures can now
be set as one group.
7. Do steps 3-6 again for the remaining axles.
8. Press the SET button to return to the mode menu.
9. Press the BACK button to return to the main screen.
Setting the High Pressure Alarm
1. Press and hold the SET button until a beep is heard from the display. HI PRESSURE SET will show at the
bottom of the screen. See Figure 13 .
Figure 13: High Pressure Set Parameter Screen
2. Press the SET button again to enter that mode.
3.
Press the
GO
button to scroll/cycle to a specific axle.
Note:
Alarm adjustment to 20% over normal tire pressure is ideal for colder climates, and 25% over normal
tire pressure is ideal for hotter climates.
4. Press the + button or the - button to adjust the high pressure alarm to 20-25% over the normal tire pressure
for that axle. See
Figure 14
.
© Pressure Systems International Inc.
All rights reserved worldwide.
24 T004-01 Rev 06-19