P.S.I TireView, Руководство по установке и обслуживанию, Страница: 27 / 35

Section 1 - TireView
™
TPMS Instruction Manual
3. The audible alarm can be silenced for a short time by pressing any of the buttons on the front of the TPMS
display.
4.
The red LED warning light will continue to flash until the pressure or temperature issue is resolved and
brought back within the preset values. See Figure 2 for location of the red LED warning light.
Fast Leak Alert
Note:
When a fast tire air leak is detected, the sensor will send that data immediately to the TPMS display.
1.
The TPMS display alarm will sound and the red LED warning light will immediately flash.
2. The tire position, pressure, and FAST LEAK will also flash.
3. The audible alarm can be silenced for a short time by pressing any of the buttons on the front of the TPMS
display.
4. The red LED warning light will continue to flash until the pressure is resolved and brought back within the
preset values. See
Figure 2
for location of the red LED warning light.
Sensor Low Battery Alert
Note:
The low battery alert will display for only a short time until the internal battery is exhausted. If the TPMS
display is not ON often, the low battery signal may be missed. If the sensor is not reporting to the TPMS display, call
P.S.I.
™
to troubleshoot potential issues first in order to determine if the sensor must be replaced.
1. The sensor low battery indicator will show when the sensor battery is at the end of its life.
2.
The affected tire position, pressure and temperature readout, low battery symbol, , and tire warning icon,
, will flash on the TPMS display.
Connect / Disconnect A Tractor from the TPMS Display
Note: A tractor can be temporarily removed from the TPMS display.
To disconnect a tractor from the TPMS display:
1. Make sure the tractor is showing on the TPMS display.
2.
Press the
GO
button and the
+
button at the same time. The sensor data on the trailer will not be read.
To connect a tractor to the TPMS display:
1.
Press the
GO
button and the
+
button at the same time. The tractor section on the TPMS display will
appear and the TPMS display will now read data from the sensors.
Connect / Disconnect A Trailer from the TPMS Display
Note: A trailer can be temporarily removed from the TPMS display.
To disconnect a trailer from the TPMS display:
1. Make sure the trailer is showing on the TPMS display.
2. Press the GO button and the - button at the same time. The sensor data on the trailer will not be read.
© Pressure Systems International Inc.
All rights reserved worldwide.
27 T004-01 Rev 06-19