P.S.I TireView, Руководство по установке и обслуживанию, Страница: 16 / 35

Section 1 - TireView
™
TPMS Instruction Manual
Cap Sensor ±3 PSI (±0.02 BAR)
with a Digital Gauge
Pressure Accuracy Range
Internal Sensor ±1.5 PSI (±0.1 BAR)
Temperature Accuracy Range ±5.4 °F (±3 °C)
Transmission Power <10 dBm
Transmission Frequency 433.92 MHz
Cap Sensor Three to Four Years
Approximate Battery Life
Internal Sensor Three to Five Years
Cap Sensor 1.14 in. (29 mm) x 1.26 in. (32 mm)
Physical Sensor Size
Internal Sensor 2.64 in. (67 mm) x 1.26 in.
(32 mm) x 0.71 in. (18 mm)
Cap Sensor 1.27 oz. (36.00 grams)
Sensor Weight
Internal Sensor 1.25 oz. (35.43 grams)
TireView ™ TPMS Display Specifications
Temperature Operating Range -4–176 °F (-20–80 °C)
Storage Temperature Range -22–185 °F (-30–85 °C)
Charger Input Voltage 5–30 VDC
Frequency 433.92 MHz
Size 4.6 in. (117 mm) x 2.99 in. (76 mm) x 1.06 in. (27 mm)
Weight 4.4 oz. (125 grams)
Setting ID Truck Three-Digit Identifier
1. Press the SET button until the display beeps and then release it.
2. Press the + button eight times until SET ID TRUCK mode shows on the TPMS display.
3. Press the SET button to enter the SET ID TRUCK mode.
4. Press the SET button again. The first digit will blink.
5. Press the + button or the - button to select the first digit.
6. Press the GO button to move to the next digit.
7. Do steps 5-6 again for the second and third digits.
8. Press the SET button to save the three-digit ID.
9. Press the BACK button two times to return to the main screen.
Setting ID Trailer Three-Digit Identifier and Trailer Selection
Note: Four trailers with sensors can be paired into the TireView
™
TPMS display and each can be selected to be
viewed on the TireView
™
TPMS display.
© Pressure Systems International Inc.
All rights reserved worldwide.
16 T004-01 Rev 06-19