P.Lindberg TT-HT230B-2, Инструкция по эксплуатации

Страница: 24 / 26

4
MAN 9042857 EN V1
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70 21 26 26 DK6600 Vejen e-mail: salg@p-lindberg.dk
Maintenance:
Sharpen the teeth as required. Use a file or angle grinder.
Adjust the teeth by tightening/loosening the teeth assembly screws. Be careful not to
overtighten! Overtightening will create heat!
Lubricate the blade regularly with a thin oil. We recommend a good quality spray oil.
Maintenance schedule
First
start-up
Every 25
hours of
operation
Every 50
hours of
operation
Every 100
hours of
operation
Comment
M
ot
or
Check fuel system for leaks X
Check for loose bolts and
screws
X
Remove leaves, etc. from
cylinder cooling fins
X X X
Clean intake filter element –
replace if necessary
X X X
Clean and adjust spark plug
X X X
Electrode gap
0.6–0.7 mm
Clean fuel tank X X
Tighten cylinder bolts X
Tighten all bolts and screws X
Check silencer for internal
carbon deposits
X
Bla
de
Inspect the teeth X X X X
Adjust teeth assembly
screws
X X X X
Tighten screws in gearbox X X X X
Lubricate gearbox grease
nipple
X X X X
Use heat-resistant
grease.
Lubricate blade Every ½ hour Thin oil or spray