16
MAN 9063092 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tlf: 70212626
DK-6600 Vejen
e-mail: [email protected]
4.
Attach the chain from the PTO shaft’s sheath to one of the linkage’s top brackets to
make sure the sheath does not rotate.
5.
In case the PTO shaft must be shortened:
a)
Hold the two halves next to one another in the shortest possible working position and
mark them off.
b)
Shorten the inner and outer sheath tubes by the same distance.
c)
Shorten the inner and outer slide runners to the same length as the sheath tubes.
d)
Correct overlap is at least half of the length of the tubes and both tubes should be the
same length.
e)
Grind down all sharp edges and remove burrs. Lubricate the slide runners.
CAUTION
The tractor’s PTO sheaths and all mower hoods, flaps and guards must be
attached at all times whenever the flail mower is being operated!
Operating instructions:
Transport:
PLEASE NOTE: Always remove the PTO shaft before raising the mower to the
transport position.
1.
Always make sure that the PTO shaft does not make contact with the tractor or the flail
mower when raising the flail mower to the transport position. Adjust and set the
tractor’s three-point linkage’s lifting height so the shaft does not make contact with the
flail mower in a raised position.
2.
Reduce the tractor’s driving speed when turning and allow plenty of space to keep the
flail mower from coming in contact with obstacles such as buildings, trees or fences.
3.
Always choose a safe driving speed for transport. Always allow faster vehicles to safely
pass.
4.
When driving in rugged or hilly terrain, put the tractor in a lower gear.
CAUTION
When driving on a public road, no matter whether it is day or night, switch on
lights and other equipment to alert other road users. Obey all traffic
regulations.
