28
MAN 9066898 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Engine not running at full
speed
Set throttle to FAST
Trimmer vibrates
Trimmer head adjustment
screws are loose
Tighten the adjustment
screws with the T-wrench
Trimmer cord lengths are
very different
Adjust trimmer cord to
roughly equal lengths
Loose nuts and bolts
Check that all bolts on nuts,
including engine bolts, are
tight.
Trimmer head is damaged
Replace the damaged part
Trimmer head loses trimmer
cord
Trimmer cord is not correctly
attached
Follow the instructions in the
section “Replacing the
trimmer cord”
Damaged cord holder
Replace trimmer head
Trimmer cord is wrong
thickness
Use a 4 mm trimmer cord
Transport
If the machine is to be transported in a vehicle, make sure it is upright and cannot tip
over.
Disposal
When the machine is to be disposed of, disassemble it and dispose of the parts in
accordance with applicable regulations relating to the disposal of the material in
question.