background image

Instruction Manual 

Updated11/2013

22 

| 24

9.   Conformity

9.1  associateD guiDelines anD stanDarDs

IEC 61851-1:2010 and / or EN 61851-1:2011 - Part1: 

General requirements

IEC 61851-22 and / or EN 61851-22:2002: 

AC charging stations for electric vehicles

IEC 61439-5:2010 EN 61439-5:2011 - Part 5: 

Switchgear and controlgear assem-

blies for power distribution in public networks

IEC 61439-7:2011 and / or EN 61439-7:2011 – Part 7 (Draft): 

Switchgear and 

controlgear assemblies for specific installations at public sites such as marinas, 
camping sites, market squares and similar applications and for charging stations 
for electrical vehicles

IEC 61000-6-3:2006 and / or EN 61000-6-3: 

Generic standards - interference emis-

sion for  residential, commercial and light-industrial environments

IEC 61000-4-3:2006 and / or EN 61000-4-3: 

Testing and measurement techniques 

- Radiated, radio-frequency, electromagnetic field immunity test

IEC 61000-4-2:2009 and / or EN 61000-4-2: 

Testing and measurement techniques. 

Electrostatic discharge immunity test

IEC 61000-2-2:2002 and / or EN 61000-2-2: 

Environment. Compatibility levels for 

low-frequency conducted disturbances and signalling in public low-voltage power 
supply systems

IEC 61000-4-11:1994 and / or EN 61000-4-11: 

Testing and measurement tech-

niques - Voltage dips, short interruptions and voltage variations immunity tests

IEC 60950-1:2005 and / or EN 60950-1: Information technology equipment - 
Safety- Part 1: 

General requirements

IEC 60950-22:2005 and / or EN 60950-22: 

Information technology equipment - 

Safety- Part 22: Equipment installed outdoors

VDE 0100-722 – Part 7-722: Low voltage electrical installations - Part 7-722: 

Requirements for special installations or locations

VDE-AR-N 4102: 

Outdoor connection cabinets connected to the low voltage 

distribution network of the general power supply - Technical requirements for the 
connection of stationary switch and control cabinets, meter connection columns, 
telecommunication systems and electric vehicle charging stations

 

Содержание Wallbox Duo

























Отзывы: