Instruction Manual
Updated11/2013
17
| 24
start charging process:
step 1
To start a charging session, hold the RFID card up to the card reader for approx.
3 seconds.
step 2
Plug in your cable to the selected outlet. Note: You may plug in your cable
prior to registering the RFID card.
step 3
The Start button, Button 1 or 4, begins to fl ash. Press the green fl ashing button
to start the charging process. The button is backlit in green throughout the
entire charging process.
terminate charging process:
step 1
To end a charging session, hold the RFID card up to the card reader again
for approx. 3 seconds. This must be the same card as was used to initiate the
charging session.
step 2
Then press the Stop button, Button 3 or 6, and the session will end. The plug
may now be removed from the socket.
step 3
The socket is now free and available for a new charging session.
