introduction
3
Congratulations on purchasing an Ozito 405mm Variable
Speed Scroll Saw. We aim to provide quality tools at an
afordable price.
We hope you will enjoy using this tool for many years. Your
405mm Variable Speed Scroll Saw SSB-405 has been designed
for precise straight and curved cuts in wood, plastic and plaster.
It is intended for DIY use only.
electrical Safety
WarninG!
When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that the
power supply corresponds to the voltage on the rating plate.
note:
The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
If the supply cord is damaged, it must be replaced by a qualified electrician or a
power tool repairer in order to avoid a hazard.
If operating a power tool in a damp location is unavoidable use a residual current
device (RCD) protected supply Use of an RCD reduces the risk of electric shock.
using an extension lead
Always use an approved extension lead suitable for the power input of this tool. Be-
fore use, inspect the extension lead for signs of damage, wear and ageing. Replace
the extension lead if damaged or defective. When using an extension lead on a reel,
always unwind the lead completely. Use of an extension lead not suitable for the
power input of the tool or which is damaged or defective may result in a risk of fire
and electric shock.
