operation (cont.)
11
adjusting the table insert
WarninG!
Always ensure that the variable speed scroll saw is switch off
and disconnect from mains power supply before making any adjustments.
The table insert (6) requires to be positioned depending if a straight cut or bevel
cut is required. Incorrect positioning can result in damaging the table insert (6) and
damaged or broken blades.
For a straight cut the table insert (6) opening
requires to be positioned to the left (Fig. 6).
For a bevel cut the table insert (6) opening requires
to be positioned to the right (Fig. 7).
Remove the table insert (6), by pushing up from the
bottom of the table (7).
Position the opening of the table insert (6) to the
left or to the right depending on the
cutting application required.
Align the 4 grooves in the table insert (6) with the
lugs on the table (Fig. 8) and gently push into place.
on/off Switch (9)
To turn the machine on, press the green On (I)
button (Fig. 9).
To turn the machine off, press the red Off (O) button.
note:
This variable speed scroll saw is automatically
turned off in the event of a power failure, accidently
unplugged or turned off at the mains power supply.
You will need to push the green On (I) button again to
restart the variable speed scroll saw.
•
•
•
•
•
•
•
Fig. 6
Fig. 7
Fig. 8
Fig. 9
