4 • Oz Charge manual
www.ozcharge.com.au
ELECTRICAL PARTS & ACCESSORIES:
AC Power Cord:
1.8m with SAA 3 Pin AU Plug
DC Output Lead:
1.8m with Crocodile Clips, Ring Terminals & Temp. Compensation
Charging Leads:
Crocodile Clips / Ring Terminals. Note: To use the ring teminals
you’ll need an Alan key to remove the bolts from the crocodile clips
TECHNICAL SPECIFICATIONS:
Model Number
OC1225U
OC2412U
Output
25A @ 12V DC
12A @ 24V DC
Input Voltage
220-240Vac / 3.0A
220-240Vac / 3.0A
Input Frequency
50Hz
50Hz
Charge Voltage (25°C)
Gel - 14.1V
AGM&WET - 14.4V
Calcium - 14.7V
Gel - 28.2V
AGM&WET - 28.8V
Calcium - 29.4V
Equalising Voltage
Gel - 14.3V
AGM&WET - 14.6V
Calcium - 15.5V
Gel - 28.6V
AGM&WET - 29.2V
Calcium - 31.0V
Float Voltage
13.6V
27.2V
Power Supply Output
13.8VDC / 25A Max.
27.6VDC / 12A Max.
Start Voltage
2V
4V
Operating Temperature -15 to 50°C
-15 to 50°C
Storage Temperature
-25 to 85°C
-25 to 85°C
Operating Humidity
90% RH Max.
90% RH Max.
Temp. Compensation
-25mV/°C
-50mV/°C
Size (L*W*H)
279mm x 141mm x 67mm
279mm x 141mm x 67mm
Weight
2 kg
2 kg
Approvals
CE, AS/NZS, EMC
CE, AS/NZS, EMC
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (Not required on sealed & maintenance free batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway between
the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible and to
determine which Battery Type and Charge Rate settings you will use.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
