2 • Oz Charge manual
www.ozcharge.com.au
•
Selectable battery type.
•
Selectable charge rate / mode.
•
Patented battery rejuvenation (reconditioning).
•
Battery voltage retention analysis.
•
Pulse charge for long term maintenance.
•
Ultra lower power consumption (ECO Mode)
•
Multi Stage:
1 - Qualification - Battery condition check
2 - Battery rejuvenation (recondition mode)
3 - Soft start charging
4 - Bulk charging
5 - Absorption charging
6 - Equalisation charging
7 - Battery analysis
8 - Float mode
9 - Long term maintenance pulse charge
•
Automatic diagnosis and charge: On power up, the charger will automatically diagnose the
battery condition and determine if the rejuvenation mode (reconditioning) or charge cycle is
required.
•
Patented battery rejuvenation technology: The charger has a unique and patented reju-
venation feature which uses high voltage equalising and peak pulse reconditioning to repair
sulphated batteries. This feature is fully automatic and depends on the internal impedance of
the battery.
•
Can be left on 24/7 to ensure your battery is always maintained and fully charged: The
battery charger can be left unattended and left permanently connected all year round. The
intelligent charger will monitor the battery voltage and will maintain it at peak performance
with a special pulse charge during long term maintenance.
•
Short circuit and reverse polarity protection:
•
Heavy-duty and corrosion-resistant output connectors:
•
Crocodile clips and ring terminals: It comes with 2 different kinds of connectors, crocodile
clips and ring terminals. The ring terminals are part of the crocodile clips. You’ll need and Alan
key to remove the Crocodile clips from the ring terminal if you require this connection type.
•
Rapid Charge Mode: Uses maximum charging current to
ensure the fastest charge time. You may here the fan turn on
during this mode.
•
Silent Charge Mode (Night Mode): Charges at a reduced
charge rate so the cooling fan is not required.
•
Maintenance Mode: Ideal and recommended for long term
maintenance charging or for charging smaller batteries.
•
Power Supply Mode: Press & Hold the Charge Rate button
for 3 seconds to activate and deactivate Power Supply Mode.
When in Power Supply Mode, the Pwr. Supply LED will be ON.
RED
BLACK
RED
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
BLACK
Note: Image shows OC1225U model.
