9 • Oz Charge manual
www.ozcharge.com.au
TROUBLE SHOOTING
Problem
Indication
Possible Causes Suggested Solution
Charger does not work? No Indicator
lights on
- No AC power
- Check AC connections and make
sure the AC Power Point is switched
ON.
- Try a different AC Power Point which
you know is working.
Charger does not work? Both Charge
Rate and Battery
Type LED’s
Flashing
- Unit in ECO Mode
- No Battery is connected or detected
and unit is in Eco Mode.
- Check battery connection and
voltage is over 2V(OC1225U) or
4V(OC2412U)
Charger has no DC
output?
Fault Red LED
is ON
- Output is short
circuited
- Reverse polarity
protection
- Loose / bad
connection to the
battery
- Check DC connection between
charger and battery and make
sure they are not short circuited.
(Touching each other)
- Check that the crocodile clips have
not fallen off or come loose.
- Check that the crocodile clips/
ring terminals are connected to the
correct polarity.
Note: The charger output is only
present when connected to a battery.
No charging current?
Fault Red LED is
Flashing
- Battery is severely
sulphated
- Battery has a
damaged cell
- Overheat protection
mode
- Check the battery condition, age
etc.
- Battery may need replacement.
- Move battery & charger to a cooler
environment.
The full / float light
won’t come on.
Fault Red LED is
Flashing
or
Full Green LED is
Flashing
- Battery Ah capacity
too large for the
battery charger and it
has time out
- Battery is defective
- Battery is severely
sulphated
- Check the charger specifications
match the battery capacity. Eg. make
sure battery capacity is not too big
for the charger.
- Battery may need replacement.
- Charge rate selected might be too
low for the battery. Switch charger
off and on and try again or try a
higher charge rate setting providing
it doesn’t exceed the maximum
charge limit for your battery.
No Output in Power
Supply Mode
Fault LED is
ON and Power
Supply LED is
ON
- Output leads are
Short Circuited or
Reverse Polarity
- Output has been
overloaded
- Check output connections.
- Switch off some loads to reduce
load current.
OPTIONAL ACCESSORIES / REPLACEMENT PARTS
Model: OC-RDP - Oz Charge Remote Display to suit OC1225U/OC2412U
For the full range of replacement parts and accessories, please visit our website:
www.ozcharge.com.au. / www.ozcharge.co.nz
