8. Check Alarm Setting
Send SMS “ALARM*123456” to the tracker number, “ALARM” is command, “123456” is password, the
tracker will send back the information of the alarm setting, for example:
Shock Alarm:OFF,Geo-Fence Alarm:OFF,Over Speed Alarm:OFF,Power Down Alarm:
ON, Calling:ON,SMS:ON, Battery:88%.
9. Cancel All Alarm Setting
Send SMS “CANCELALARM*123456” to tracker, “CANCELALARM” is a command, “123456” is password,
the tracker will send back information “All Alarm Cancel”, and cancel all the shock alarm setting in the tracker.
if the password is not right, the
operation is fault, the tracker will send back information “Wrong Password”.
Note: RESET and FACTORY also can cancel all alarm setting, about the difference please see above.
10. Listening or Monitor sound around tracker
Send SMS “LISTEN*123456” to tracker, “LISTEN” is a command, “123456” is password, then the tracker
will make a call back to the SMS sender, user pick up the calling and then the sound around the tracker can
be listened. Hang up the calling will stop the LISTEN command.
Platform Operation
The platform operation please refer the platform operation guide, scan the following QR code or click the
website link to download the platform manual, visit website
www.999gps.net
and click the Manual icon also can
download the platform manual.
Platform User Guide Word Version
Platform User Guide Pdf Version
Notes:
1. Please confirm that the SIM card PIN code has been disabled, it means if mobile phone use
this SIM card, it is not necessary to input any password. Otherwise the tracker can not find
GSM or CDMA network, the Green LED will keep ON .
2.
This tracker use 2G GSM & 3G WCDMA network, and it upload tracking only through internet, it
can not work in CDMA network CDMA2000 network, if the 4G SIM card can use in 2G GSM
-14-
