time, which can be set from 30 to 999 seconds. The tracker will send back information “Set Interval xxx OK”, if
the password is not right, the operation is fault, the tracker will send back information “Wrong Password”. 30
seconds is the default interval time. Longer upload interval time can save battery and GPRS data cost, but this
will make the total mileage to more error.
8. Start / Stop upload location to server
The upload location to server function can be started or stopped by user, send SMS
START*123456” or
“STOP*123456” to tracker, “START” or “STOP” are command, “123456” is password. The tracker will send
back information “Start / Stop upload location”, if the password is not right, the operation is fault, the tracker
will send back informat
ion “Wrong Password”. Normally the tracker will start upload location if the tracker
begin to move, if the upload is stopped by user, the new location & new history tracking can not be checked
on the platform any more.
9. Set APN & GPRS user name & password
This tracker use GPRS to upload the information to internet server, most SIM card need active GPRS
service first by SMS, the tracker can configure APN automatically after power on according different SIM card,
if the APN & GPRS user name password are not right, the tracker can not upload location to platform (Red
LED will flash twice, and the location can not update on the platform), then you need sending SMS to tracker
to change them manually, please confirm the auto configuration of APN & GPRS user name password is right,
call your tracker SIM card mobile phone company to get the APN & GPRS setting, sending SMS
“CHECK*123456” to the tracker can check the current APN & GPRS auto setting. if the APN & GPRS are not
right, please set by the following description.
Send SMS “APN*123456*apnname” to the tracker, in which, “APN” is the fixed command, “123456” is
the password and “apnname” is the APN name of a mobile phone company. Having successfully been made,
there will be a SMS “APN: apnname”.
Send SMS “USERNAME*123456*username*password” to the tracker, “USERNAME” is a command,
“123456” is the password of the tracker; “username” is the mobile company GPRS user name, “password” is
the mobile company GPRS password, if the operation is success, the tracker will send back the information
“Username:username, Password:password”, if the password is not right, the operation is fault, the tracker
will send back information “Wrong Password”.
10. Set Platform Server IP
Send SMS “IP*123456*58.64.155.133,8011” or “WEB*123456*d3.igps.info,8011”to the tracker, in which,
“IP” or “WEB” is the fixed command, “123456” is the password and “58.64.155.133,8011” is the IP of the
server. “d3.igps.info,8011” is the domain name and port of the of the server, Having successfully been set,
there will be a SMS “IP: 58.64.155.133,8011”. However, the IP address may be changed with the upgrade of
our server, so please see to the notices on our website.
-8-
