sending information to platform when the alarm is triggered.
4. Alarm Notice by SMS ON/OFF:
Send SMS “SMSON*123456” to tracker, in which, “SMSON” is the fixed command and “123456”is the
password. Having successfully been made, there will be a reply sms to indicate the alarm will be noticed by
sending a sms. Send SMS “SMSOFF*123456” to tracker, in which, “SMSOFF” is the fixed command and
“123456”is the password. Having successfully been made, there will be a reply sms to indicate the alarm will
not be noticed by sending a sms. If the alarm notice is set to SMSOFF, then the tracker only making a call or
sending information to platform when the alarm is triggered.
5. Set GPRS Mode: KEEPONLINE / SHOCKCONTROL
Send SMS “KEEPONLINE*123456” (Keep online all the time even the tracker stop moving) or
“SHOCKCONTROLGPRS*123456” (Turn off GPRS after the tracker stop moving 10 minutes) to the tracker,
“KEEPONLINE” or “SHOCKCONTROLGPRS” is a command, “123456” is the tracker password, if the
operation is success, the tracker will send back the information “GPRS: Keep Online” or “GPRS: Shock
Control”, if the password is not right, the operation is fault, the tracker will send back information “Wrong
Password”. the default setting is Shock Control, when the tracker begin to move, the tracker begin upload the
tracking, the tracker status on the platform will change to online immediately. if the tracker stop moving, the
tracker will stop upload the tracking and turn off GPS & GPRS to go to sleep mode , a few minutes later the
tracker status on the platform also will change to offline.
If the tracker is always online, the tracker will send tracker status to platform all the time, but this will cost
more data charge and car battery power, and if the car will park long time or the car battery is old, this maybe
cause the car battery power low and can not start car engine, this working mode is not recommended .
6. Check Tracker ID:
The tracker ID is print on the label of the tra
cker, if the label is missing, send SMS “ID*123456” to tracker,
in which, “ID” is the fixed command and “123456”is the password. Having successfully been made, there will
be a SMS “ID: 801201512345678”, in which, “801201512345678” is the ID and every tracker corresponds to
the only number. This number is used to differ the tracking uploaded to the website from others. the last 7
digital number of the tracker ID is the user name and password of the tracker on the platform, for example the
tracker ID is : 801201512345678, and then the user name on the platform of this tracker is : 2345678, and the
platform password for this user name also is :2345678 or 123456,user can login the platform
www.999gps.net
to change the password.
7. Set the upload time interval
The GPS location information upload time interval can be set from 30 to 999 seconds. Send SMS
“INTERVAL*123456*xxx” to tracker, “INTERVAL” is a command, “123456” is password, “xxx” is the interval
-7-
