Output Solutions CP-1001 SERIES Скачать руководство пользователя страница 11

Страница: 11 / 61

1.5.5 Operation Panel

LCD MESSAGE DISPLAY (Max. 16 digits x 1 line)

- Displays the machine status with an alphanumeric and symbols.

POWER LED (Green)

- Turns on while the power is on.

ON LINE LED (Green)

- Turns on when ready is communication with a host machine.
- Blinks in-service of communication.

ERROR LED (Red)

- Turns on while the machine detects something wrong.

[FEED]

key (Paper Feed Key)

- Used to feed a piece of media or discharge the media when an error occurred.
- Used to make positioning of media.

[RESTART]

key (Reissue Key)

- Used to exit from the pause mode to restart issuing the media.
- Used to exit from the error mode to restart issuing the media.
Note that some errors cannot be released even by depressing the

[RESTART]

key.

(See Section 5.1, Error Messages.)

[PAUSE]

key

- Used to temporarily stop issuing the media.
- Used to initialise the machine after a reset operation.

LCD Message Display

PAUSE Key

RESTART Key

FEED Key

POWER LED

ON LINE LED

ERROR LED

Содержание CP-1001 SERIES






























































Результаты поиска

Содержание CP-1001 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Output Solutions CP-1001 SERIES, Руководство пользователя

Результаты поиска

Содержание CP-1001 SERIES

Отзывы:

Бренды по названию

Популярные бренды