8
OAWA3 Wireless Transmitter/Amp-Receiver System
Computer/Media Server Connections
PC Configurations
1. Select the “Zone” setting you wish
to use when transmitting this audio
signal.
2. Connect supplied USB cables Mini-USB
connector to the OAW3-t.
3. Connect the standard USB connector to
an open port on your PC.
4. OAW3-t status light will rapidly alternate between red and blue for 3-5
seconds.
5. Your PC will automatically recognize the OAW3-t as a USB Audio Device
(usualy a USB headset). Please allow your PC to finish the installation process
before proceeding. A message will appear in the bottom right corner of your
desktop stating “Your new hardware is installed and ready to use.”
6. Your OAW3-t is now configured as your computer or media server's default
audio playback device.
NOTE:
It may be necessary to manually select USB Headset as the default audio device
under the audio tab of your computer's Sound and Audio Devices menu located in the
computer's Control Panel.
Apple/Mac Configuration
1. Select the “Zone” setting you wish to use when transmitting his audio signal.
2. Connect supplied USB cable's Mini-USB connector to the OAW3-t.
3. Connect the standard USB connector to an open port on your Mac computer.
4. OAW3-t status light will rapidly alternate between red and blue for 3-5
seconds.
5. Click on System Preferences and select “Sound” under the “Hardware” menu.
6. Click “Output” and manually select “USB Headset”.
7. Your OAW3-t will now be configured as the default audio play-back device
on your Mac computer.
Computer/Media Server Connections
