Instruction Manual
7
Transmitter Basic Setup
OAW3-t Wireless Transmitter
Transmitter Basic Setup
OR
1. Select the “Zone” setting you wish to use when transmitting this audio
signal.
2. Connect supplied USB cable's Mini-USB connector to the OAW3-t.
3. Connect the standard USB connector to the supplied USB AC adapter. The
LED will flash red/blue for 3-5 seconds.
4. Connect the 1/8” stereo connector into the 1/8” stereo jack on the OAW3-t.
5. Connect the RCA connectors to your receiver's or processor's Pre-Out or
Tape-Out jacks (There is no Master Volume control of the OAWA3-r from
your receiver when using the Tape-Out jacks—you’ll need to use the 5030-
r’s remote control with its IR Receiver cable connected.)
6. Alternately, you may use the 1/8" stereo cable to connect the OAW3-t to the
headphone jack of a portable MP3 player or a portable CD player.
Note that the 1/8" analog input is intended for line-level (1 Vrms max) signals only.
Use of speaker-level signals may result in distortion and/or damage to your system.
